Close Menu
Heath Zenith HZ-4305-WH Motion Activated Decorative Light, 120 V,
Uses four candelabra base bulbs, 25 W maximum, (sold separately). 9-3/8 in wide x 5-7/16 in high.
GB 20-151P Disconnect Terminal, 600 V, 22 to 16 AWG, Vinyl Insulation, Red
Nylon fully insulated, rated at 600 V. 0.250 in x 0.032 in tab. 105 deg C temperature rating. Card contains male and female disconnects.
Eaton Wiring Devices TR1107V-BOX Tamper Resistantant Decorative Receptacle,
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push interminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed.
HOWARD LIGHTING HL03143RW Exit Light, 120/277 VAC
Long lasting, efficient ultra-bright white LED lamp heads and red LED exit sign illumination. 1 W (8 LEDs x 0.125 W) per head. Dual 120/277 V voltage. Charge rate/power ON LED indicator light and push to test switch. 9.6 V, long-life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board and LED lamp heads for minimum 90 mins emergency illumination. High-performance smooth chrome plated metalized reflector and plastic lens for optimal light distribution. Adjustable LED lamp heads. EZ-snap mounting canopy included for top or end mount. Universal K/O on back plate for wall mount. Injection-molded, engineering-grade, 5VA flame retardant housing, high-impact, thermoplastic in white finish. EZ snap-out Chevron directional indicators. UL listed for damp locations.
Carlon UA9AGB-CTN Conduit Elbow, Gray
For use with non-metallic solvent weld fittings. Non-conductive, impact-, corrosion- and sunlight-resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL listed.
GB GET-3100 Circuit Tester, Neondicator Display, Red
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
